Series 700 Invincible Teflon Lined Expansion Joints
Mercer Invincible Series 700 Teflon® lined expansion joints combine the advantages of Teflon’s® anti-stick properties, superior strength, excellent chemical resistance and non-aging, with the advantages of Mercer’s elastomeric expansion joints.
These include: the ability to isolate mechanical vibration, allow four way movements, long life expectancy, absorb pressure surges, eliminate electrolysis, small space requirements and allowing four way movements (axial, lateral, torsional, angular) which eliminates problems of pipes buckling or pulling apart.
Invincible Series HT700 combines all the construction and performance advantages of the 700 with high temperature resistance. Reinforced with high temperature resistant fabric, and with the cover of either EPDM or Viton, the HT700 can provide full pressure service at operating temperatures up to 350°F (176°C) and 400°F (204°C) respectively.
They are available in single (1) arch constructions, and multiple arch types to give capability for additional allowable movement. These expansion joints are available in a large variety of tube and cover material for different applications. Such materials as EPDM, Hypalon, Neoprene, Nitrile and more. Pipe sizes from 1” up to 96” are available. Control rods can be supplied if required.
If you would like to order or learn more about this product, please contact Mason UK’s friendly team of engineers.
| Documents & Files |
|---|
Related Products
Concentric & Eccentric Reducers
These products are flanged concentric and eccentric reducing expansion joints with spherical arches. The carcass is made of multiple plies of tough, rubber impregnated fabric or tire cord with rubber and duck flanges integral with body.
Mercer Duct Connectors
Flexible Connectors are used in duct systems to reduce vibration transmission and shock and accommodate thermal movements at minimum stress to the ductwork.
Series 300 Sleeve Type Expansion Joint
Our Mercer series 300 sleeve type expansion joints are available in a large variety of tube and cover material for different applications. Such materials as EPDM, Hypalon, Neoprene, Nitrile and more.
Series 450 Flexmore Expansion Joint
Mercer Flexmore Series 450 is the most economical, full-pressure elastomeric expansion joint available. Tough fabric and tirecord plies are bonded between the tube and cover in a steel mould and then cured in a thermostatically controlled steam chamber.
Series 500 & 600 Invincible Heavy Duty Expansion Joints
The Mercer Invincible 500 and 600 series are our most rugged expansion joints. They are all hand built by our skilled craftsmen.
Series 800 Teflon Lined Expansion Joints
MERCER Series 800 PTFE Teflon® expansion joints are the sure and economical way to solve difficult expansion and misalignment problems. The Teflon® material is corrosive-proof, chemically inert and does not age.
Series 1000 Low Spring Rate, Large Movement Expansion Joints
The Series 1000 are low spring rate, large movement expansion joints for applications where significant movement is required in the pipeline.
VIBRAFLEX 150 Reinforced Rubber Pipe (Fluid Service)
The Mercer Vibraflex reinforced rubber pipe is hand built by our skilled craftsmen. To minimize pipe elongation, the carcass is constructed of multiple plies of high tensile polyester tire cord or Kevlar for high temperatures.
