New Products

The HDLP-A Hanger (PREVIOUSLY CALLED THE CRCH-X) has been designed as a low profile ceiling hanger and is used where floor to ceiling heights are critical. It uses the same spring element as the 30-X and HDQF-X Hanger, and therefore has the same properties.

The MFS-AJ is a jack specially built for attachment to joists and its used as part of a lightweight acoustic floating floor system. The ability to adjust the height gives it an advantage over the standard MFS when placing jacks on floors that aren’t level.

The MFS-AF is an acoustic floating floor jack specifically built for lightweight floors. The ability to adjust the height gives it an advantage over the standard MFS when placing jacks on floors that aren’t level.

Mason Adjustable Sliding Guides (ASG) are pipe guides that can be installed in any orientation. They come is a range of standard sizes to suit pipes from 20mm to 300mm in diameter. Larger Guides are available on request. Full details can be found in the attached bulletin below.

Joist or wall hanger with double deflection LDS rubber element and can be fitted with a ceiling channel clamp or eye bolt.

The HDLP-A Hanger (PREVIOUSLY CALLED CRCH) has been designed as a low profile ceiling hanger and is used where floor to ceiling heights are critical. It uses the same rubber element as the HD-A and HDQF-A Hanger, and therefore has the same properties.

HDQF-X quick fit ceiling hanger (Spring Variant). This hanger has been designed to aid the contractor with a quick and easy installation of suspended acoustic ceilings.

HDQF quick fit ceiling hangers use high quality low dynamic stiffness natural rubber. This hanger has been designed to aid the contractor with a quick and easy installation of suspended acoustic ceilings.

This AFA is a acoustical furring attachment for use with metal or wood stud walling. It uses a low dynamic stiffness natural rubber for effective isolation and the metal elements of the AFA are completely encapsulated.