HDLP-X Low Profile Ceiling Hanger
The HDLP-X Hanger has been designed as a low profile ceiling hanger and is used where floor to ceiling heights are critical. It uses the same spring element as the 30-X and HDQF-X Hanger, and therefore has the same properties.
The primary channel of the ceiling grid system clips either side of the HDLP-X which saves a lot of space. Most other ceiling hangers sit above the ceiling grid system.
Spring hanger performance
While the HDLP is normally used with a rubber element, this is unsuitable for applications where the noise source is impact (for example from a gym above) or mechanical (for example a fan coil unit).
For these purposes a spring is required. Springs can react quickly enough to absorb impact and can also absorb low frequency noise.
All Mason UK spring hangers feature a neoprene cup, required to absorb high frequency noise. This extends through the hanger box which ensures that the hanger rod does not contact the hanger box.
Unistrut variant
Our HDLP hangers are also available in a Unistrut variant to accept 41x41mm Unistrut channels (or similar) for acoustic ceiling constructions utilising these channels. The hanger profile is modified to accept the wider channel. The following image shows a hanger installed before the total weight of the boards is upon the hanger. The spring will compress under the final ceiling load, and a gap will be apparent between the soffit and the top of the housing.
See the following details for example installation:
| Documents & Files |
|---|
Unistrut Variant:
Related Products
HDQF-X Spring Hanger
HDQF-X quick fit ceiling hanger (Spring Variant). This hanger has been designed to aid the contractor with a quick and easy installation of suspended acoustic ceilings.
30 Series – Acoustic Spring Hanger
The 30 hanger series can be fitted with a range of springs to suit acoustic and weight requirements. Spring hangers are used to isolate against low frequency noise from sources such as footfalls and mechanical vibration.
30N Series – Spring Hanger
The 30N hanger series can be fitted with a range of springs to suit acoustic and weight requirements. Spring hangers are used to isolate against low frequency noise from sources such as footfalls and mechanical vibration.
HDSM-X Spring Joist Hanger
Joist or wall hanger with 25mm deflection spring element. They can be fitted with a ceiling channel clamp or eye bolt.
DNHS – Acoustic Spring Hanger
The DNHS series of hanger features both a metal spring and an LDS rubber element. This provides acoustic isolation against both low and high frequency vibration.
HS – Spring Hanger
The HS series of spring hanger allows for a wide range of springs to be used to suit both acoustic and load requirements.
Spring Hangers
Mason U.K. has a large range of spring hangers available to suit a wide variety of loads and acoustic requirements.
