Concentric & Eccentric Reducers
These products are flanged concentric and eccentric reducing expansion joints with spherical arches. The carcass is made of multiple plies of tough, rubber impregnated fabric or tire cord with rubber and duck flanges integral with body.
The construction also includes embedded solid steel wire or other radial reinforcement and steel ring arch anchors. Optional coating of Hypalon paint for additional protection is also available. A large variety of tube and cover materials for different applications are available. Such materials as EPDM, Hypalon, Neoprene, Nitrile and more. Control rods can be supplied if required.
FER500 Eccentric Expansion Joint
Eccentric expansion joints allow for misalignment of the mating flanges and pipework. Initial misalignment should be kept to a maximum of 1/8”. Pipe sizes from 2” x 1-1/2” (Large End x Small End) up to 54” x 48” (Large End x Small End) are available.
FCR500 Concentric Expansion Joint
The concentric expansion joints are designed for applications where the centreline of the pipework is retained between the reducer flanges. Pipe sizes from 2” x 1” (Large End x Small End) up to 72” x 66” (Large End x Small End) are available.
If you would like to order or learn more about these products, please contact Mason UK’s friendly team of engineers.
| Documents & Files |
|---|
Related Products
Mercer Duct Connectors
Flexible Connectors are used in duct systems to reduce vibration transmission and shock and accommodate thermal movements at minimum stress to the ductwork.
Series 300 Sleeve Type Expansion Joint
Our Mercer series 300 sleeve type expansion joints are available in a large variety of tube and cover material for different applications. Such materials as EPDM, Hypalon, Neoprene, Nitrile and more.
Series 450 Flexmore Expansion Joint
Mercer Flexmore Series 450 is the most economical, full-pressure elastomeric expansion joint available. Tough fabric and tirecord plies are bonded between the tube and cover in a steel mould and then cured in a thermostatically controlled steam chamber.
Series 500 & 600 Invincible Heavy Duty Expansion Joints
The Mercer Invincible 500 and 600 series are our most rugged expansion joints. They are all hand built by our skilled craftsmen.
Series 700 Invincible Teflon Lined Expansion Joints
Mercer Invincible Series 700 Teflon® lined expansion joints combine the advantages of Teflon’s® anti-stick properties, superior strength, excellent chemical resistance and non-aging, with the advantages of Mercer’s elastomeric expansion joints.
Series 800 Teflon Lined Expansion Joints
MERCER Series 800 PTFE Teflon® expansion joints are the sure and economical way to solve difficult expansion and misalignment problems. The Teflon® material is corrosive-proof, chemically inert and does not age.
Series 1000 Low Spring Rate, Large Movement Expansion Joints
The Series 1000 are low spring rate, large movement expansion joints for applications where significant movement is required in the pipeline.
VIBRAFLEX 150 Reinforced Rubber Pipe (Fluid Service)
The Mercer Vibraflex reinforced rubber pipe is hand built by our skilled craftsmen. To minimize pipe elongation, the carcass is constructed of multiple plies of high tensile polyester tire cord or Kevlar for high temperatures.
