HDSM-A Joist Hanger
Joist or wall hanger with double deflection LDS rubber element. They can be fitted with a ceiling channel clamp or eye bolt.
HDSM-A Specification:
HDSM-A hangers consist of a side attachment steel angle gusseted on each side to prevent bending. The gussets protect an AASHTO bridge bearing quality LDS rubber element molded with an integral lock in grommet at the bottom to prevent steel rod to housing acoustical short circuiting. Dynamic Stiffness does not exceed 1.4 nor the corrected frequency 8 Hz. Housing configurations offered for simple attachment to 1.5″ x .5″ channels or 12 gauge wire.
| Documents & Files |
|---|
Related Products
HDQF-A Rubber Ceiling Hangers
HDQF quick fit ceiling hangers use high quality low dynamic stiffness natural rubber. This hanger has been designed to aid the contractor with a quick and easy installation of suspended acoustic ceilings.
HD LDS Rubber Acoustic Ceiling Hangers
The HD range of hangers is one of our most popular anti-vibration hangers. The acoustic hanger uses a high quality low dynamic stiffness (LDS) natural rubber element which offers excellent acoustic sound isolation properties.
HDLP-A Low Profile Ceiling Hanger
The HDLP-A Hanger (PREVIOUSLY CALLED CRCH) has been designed as a low profile ceiling hanger and is used where floor to ceiling heights are critical. It uses the same rubber element as the HD-A and HDQF-A Hanger, and therefore has the same properties.
WHR Acoustic Ceiling Hangers
The WHR is a low cost ceiling hanger which still provides 5mm of deflection and is constructed from high quality low dynamic stiffness natural rubber which has natural acoustic isolation properties.
L.D.S Rubber Hangers
Acoustic, LDS (Low Dynamic Stiffness) rubber (previously neoprene) hangers can be used for suspending ceilings or mechanical plant.
